Konecranes Portal is your single point of access to our digital customer platforms for industrial crane maintenance information and TRUCONNECT data, and spare parts, accessories and manuals.
When a hoist has reached the end of its productive design life, it can be more efficient and cost-effective to replace the entire hoist instead of just replacing components. A new hoist also allows you to take advantage of new technologies such as TRUCONNECT Remote Monitoring or Smart Features.
Replacing your hoist can extend the lifetime of your existing crane and improve spare part availability. It can also support compliance with current safety regulations and standards.
Many makes or models of wire rope hoist can be replaced with a new Konecranes CXT or S-series hoist. Older Demag hoists can be replaced with the Demag DMR.
The CXT hoist has many features that ease load handling and maintenance. With Adaptive Speed Range (ASR), the motor speed varies according to the load. This allows for optimal speed and enhanced safety when handling heavier loads. Its service-friendly reeving design provides improved access to the upper rope sheaves and overload device, making rope changes, rope length adjustments and sheave replacements fast and easy.
The hoist motor brakes are sealed and dust-proof. Built for low maintenance and trouble-free operation, CXT brakes are designed to require minimal adjustment and built to last numerous operating cycles. The unique placement of the motor inside the drum protects the motor from contaminants, while increasing the cooling ability.
Radically redesigned with never-before-seen features – both inside and out – the S-series will set the standard in lifting for years to come. The newly designed structure includes next-generation features such as off-set reeving, stepless hoisting movement and synthetic rope. The tilted rope drum enables more direct rope angles to decrease the wear and tear of reeving components. And offset reeving means more balanced wheel loads for less stress on the crane structure.
The evolutionary synthetic rope is durable but light and doesn’t require lubrication. The rope also features a strong, symmetric structure for less rope defects and safer handling. Rope angle measurement allows for the use of Smart Features including Hook Centering, Snag Prevention and Follow Me.
Tap into the digital ecosystem
The S-series hoist comes equipped with TRUCONNECT Remote Monitoring. Remote Monitoring collects condition, usage and operating data and provides alerts of certain anomalies. The data can be used in maintenance planning and in predicting possible component or equipment failure and is an integral part of predictive maintenance.
The CXT hoist has many features that ease load handling and maintenance. With Adaptive Speed Range (ASR), the motor speed varies according to the load. This allows for optimal speed and enhanced safety when handling heavier loads. Its service-friendly reeving design provides improved access to the upper rope sheaves and overload device, making rope changes, rope length adjustments and sheave replacements fast and easy.
The hoist motor brakes are sealed and dust-proof. Built for low maintenance and trouble-free operation, CXT brakes are designed to require minimal adjustment and built to last numerous operating cycles. The unique placement of the motor inside the drum protects the motor from contaminants, while increasing the cooling ability.
Radically redesigned with never-before-seen features – both inside and out – the S-series will set the standard in lifting for years to come. The newly designed structure includes next-generation features such as off-set reeving, stepless hoisting movement and synthetic rope. The tilted rope drum enables more direct rope angles to decrease the wear and tear of reeving components. And offset reeving means more balanced wheel loads for less stress on the crane structure.
The evolutionary synthetic rope is durable but light and doesn’t require lubrication. The rope also features a strong, symmetric structure for less rope defects and safer handling. Rope angle measurement allows for the use of Smart Features including Hook Centering, Snag Prevention and Follow Me.
Tap into the digital ecosystem
The S-series hoist comes equipped with TRUCONNECT Remote Monitoring. Remote Monitoring collects condition, usage and operating data and provides alerts of certain anomalies. The data can be used in maintenance planning and in predicting possible component or equipment failure and is an integral part of predictive maintenance.
The new Konecranes C-series has been designed to last for more than a million operations. The hoist features an entirely new motor that is both tough and durable. With more effective motor cooling, heat is reduced leading to more power.
The gearbox has been purpose-built by us for the long haul. The lifetime lubricated gearbox has been designed for easy service access and can help boost productivity with new lifting speeds. The new safety clutch design also helps enhance performance and safety.
The new hoist shape and approach dimensions of the C-series give you more control and mobility to working areas. Less vibration means more hoisting comfort and lighter structures make for better working ergonomics.
With CLX, the hoist motor is easy to access, maintain and replace. The same easy serviceability applies to the chain drive, slip clutch, hoist limit switches, electrics and gears. As a result, the maintenance time and cost for the hoist is reduced, and productivity is increased by shorter downtime.
The brake is a critical part of the chain hoist and the safety of your lifting equipment. Our self-adjusting brake is designed to last the complete lifetime of the hoist.
Konecranes patented chain drive causes less stress on the chain, which can enhance workplace safety while extending the lifetime of your new hoist. The brake and the slip clutch are features that reduce the likelihood of a load drop in the event of a clutch failure.
The new Konecranes C-series has been designed to last for more than a million operations. The hoist features an entirely new motor that is both tough and durable. With more effective motor cooling, heat is reduced leading to more power.
The gearbox has been purpose-built by us for the long haul. The lifetime lubricated gearbox has been designed for easy service access and can help boost productivity with new lifting speeds. The new safety clutch design also helps enhance performance and safety.
The new hoist shape and approach dimensions of the C-series give you more control and mobility to working areas. Less vibration means more hoisting comfort and lighter structures make for better working ergonomics.
With CLX, the hoist motor is easy to access, maintain and replace. The same easy serviceability applies to the chain drive, slip clutch, hoist limit switches, electrics and gears. As a result, the maintenance time and cost for the hoist is reduced, and productivity is increased by shorter downtime.
The brake is a critical part of the chain hoist and the safety of your lifting equipment. Our self-adjusting brake is designed to last the complete lifetime of the hoist.
Konecranes patented chain drive causes less stress on the chain, which can enhance workplace safety while extending the lifetime of your new hoist. The brake and the slip clutch are features that reduce the likelihood of a load drop in the event of a clutch failure.