•    Trolley with coupled open winches
•    Design of all components considering a centre of gravity eccentricity of 100mm, related to the maximum die weight
•    Stable 4-point load suspension with balancing rocker
•    Millimetre-precise pendulum-free positioning
•    Redundant laser or barcode measuring systems
•    Anti-sway control
•    Die gripper with integrated slewing gear
•    Uniform utilisation of the rope strands due to integrated compensating rocker
•    Ropes tested for this application with high structural stability and high breaking load
•    Optional rope drive
•    Synchronised sensors designed redundantly and are evaluated in a fail-safe programmable logical controller (PLC)

•    Faster die change
•    Safe die handling (pick-up, transport and drop off)
•    Efficient, space-saving utilisation of the available storage area
•    Cranes and die grippers are customised as per customer requirements
•    Optimised reeving with a minimum of rope sheaves gives a maximised rope service lifetime
•    Different level of automation possible: From manual operation to semi-automatic to fully automatic in combination with the Konecranes Warehouse Managing System
•    Intelligent sensor technology recognises safe load pick-up and detects the surrounding area of gripper to avoid collisions
•    All safety-relevant functions are controlled in performance level d (PL d), category 2, according to EN ISO 13849-1. This also includes the bypassing of restrictive areas and
      route-guided target positioning
•    Crane and WMS Status visualisations on mobile devices
•    Excellent accessibility to all components for maintenance and service activities
•    Remote maintenance capability for quick problem solving and preventive maintenance planning

Sway Control limits load swing by controlling the acceleration and deceleration of the bridge and trolley, enabling faster load handling and more precise positioning. Active sway control automatically eliminates load swing during crane operations. Based on the continual measurement of angle between trolley and gripper, it fine-tunes the speed commands and stabilises load movement in trolley and bridge travel including rotational control and skew compensation. The anti-sway system provides functions, which go far beyond simple sway damping:

•    Perfect control of the load oscillation in all driving situations
•    Simultaneous motion of hoisting, long and cross travel and slewing gear rotation without any restriction
•    Highest precision at maximum driving dynamics due to short internal cycle times
•    No overshoot - stop without reversing. Virtually complete elimination of sway at stop
•    No residual sway
•    Very high target accuracy of less than ± 10 mm at the load
•    Very high load rotational angle control accuracy of less than ± 0,2 deg. at the load
•    Automatic mode at any lifting height
•    Automatic circumnavigation of restricted areas

The Hook Centering feature eliminates side pull and load swing caused by side pull. When the die gripper is coupled, the hook centering system ensures that the load can only be lifted when it is directly vertical under the trolley. The vertical angle as well as the rotation angle are determined by a camera-reflector system and compensated by the control system.

Target positioning moves the load along a pre-determined route from an initial position to a selected target position. The operator selects the target position via the radio control, presses a button, holds it down and the crane moves to that position. This reduces work cycle times and the risk of human error in repetitive operations.

Possible obstacles, such as the press, try-out press, offices or work areas, are taken into account when determining the transport routes from the die storage to the press as a bypass area, executed in safe performance level D.