Servis
Predvideno vzdrževanje in spremljanje na daljavo
Predvideno vzdrževanje uporablja spremljanje stanja, napredne preglede in analize podatkov za napovedovanje okvar delov/komponent ali opreme. Predvideno vzdrževanje lahko izkoristite z našim programom preventivnega vzdrževanja CARE, ki vam bo pomagal dodatno optimizirati vzdrževanje, zmanjšati nenačrtovane izpade delovnega procesa, izboljšati varnost opreme, produktivnost in življenjsko dobo.
Spremljanje na daljavo TRUCONNECT je ključni element predvidenega vzdrževanja. Spremljanje na daljavo se uporablja za zbiranje podatkov o stanju opreme in uporabi, ki skupaj z vašimi podatki o pregledu in vzdrževanju omogočajo celovit pregled in analizo stanja opreme, vzdrževanja in delovanja.
TRUCONNECT
Ste se pripravljeni povezati?
Nudimo več izdelkov TRUCONNECT, ki pomagajo pri vzdrževanju, omogočajo predvideno vzdrževanje ter izboljšajo varnost in produktivnost.
Spremljanje na daljavo TRUCONNECT vam nudi podatke o uporabi žerjava in obratovanju za pomoč pri načrtovanju preventivnega vzdrževanja.
Spremljanje zavor TRUCONNECT zagotavlja neprestano spremljanje stanja zavor in odkriva njihove napake.
Podpora na daljavo TRUCONNECT vam zagotavlja 24/7 dostop do svetovne mreže strokovnjakov in specialistov za žerjave, ki je v pomoč pri reševanju/odpravljanju težav in zmanjševanju nenačrtovanih izpadov.
Servis
Servisi za omogočanje predvidenega vzdrževanja
Za izvajanje predvidenega vzdrževanja morajo biti na voljo določeni servisni izdelki. Predvideno vzdrževanje omogoča kombinacija teh izdelkov, uporaba analiz in našega posvetovalnega postopka.
Jedro programa CARE vsebuje preglede in redno vzdrževanje opreme. Za učinkovito uporabo predvidenega vzdrževanja so potrebni dodatni naslednji izdelki.
TRUCONNECT Remote Monitoring and Brake*
Remote monitoring is used to collect equipment condition and usage data and is a key element of Predictive Maintenance.
Oil Analysis*
An Oil Analysis assists in deciding the optimal oil change timing for hoisting, traveling and traversing gears. Hydraulic oil can also be analyzed. The service can provide useful information regarding the condition of internal gear components. For example, oil oxidation or metallic particles in oil are potential symptoms of running problems.
Gear Case Inspection and/or Advanced Gear Case*
The Gear Case Inspection is designed to determine the condition of your crane gears and related components. A visual inspection of key components is performed, and the inspector typically checks the oil level and inspects the gear case interior and gear surfaces using an endoscope. A Regular Gear Case Inspection can be performed at any time and if a deficiency is detected, an Advanced Gear Case Inspection may be recommended for further analysis.
Coupling Inspection*
The Coupling Inspection has been designed to uncover issues that may lead to coupling failure.
RopeQ Magnetic Rope Inspection*
During a typical inspection, only the outer wires and strands of the wire rope can be visually inspected. Konecranes RopeQ™ technology and non-destructive testing methodology analyzes the condition of the internal wires, strands and wire rope core that are not typically visible.
Hook/Shank Inspection*
This inspection is designed to uncover issues that could lead to failure of the hook or bottom block. Konecranes utilizes various proven non-destructive testing techniques such as dye penetrant, magnetic particle and magnetic rubber, in addition to a visual inspection and measurements normally performed during a hook inspection.
Design Life Analysis*
Frequent inspections, while necessary, cannot always catch machinery failure that may be caused by extremely fast crack propagation. A calculation of design life will give information that helps you assess your safe working limits and plan actions for continued equipment use.